Prep for 8/27/2022 Work Session

In preparation for our upcoming work day on Saturday, Bob worked this week to make a couple of plasma torch guides. These will help us cut a new plate for the front of the cab. Last time, we tried to use the old front panel as a guide, but as you can see, the edges are pretty gnarly. Two guides were manufactured -- one is an adjustable fence that uses the edge of material as a guiding surface and the other is an arc cutter/ magnetic pivot with about 24”-46” range. This was tested on heavy cardboard at a 39” radius and a 43” radius. Let's see if we can copy this success in steel!