10/9/2021 Work Session — New England Steam Corporation

About

About

10/9/2021 Work Session

October 11, 2021

10/9/2021 Work Session

Rudy Garbely

October 11, 2021

10/9/2021 Work Session

Rudy Garbely

October 11, 2021

Click the photos below for captions!

Leverett and Hanna tackled the necessary grinding to fit the new pedestal liners that will be welded in place.

Leverett making the sparks fly.

The new liner ring.

Jim priming the braze repaired tender steps.

Endless needle scaling. Another Zen moment for Roger.

Laying out the final size of the Engineer's rear window for plasma cutting.

Window to finished size. Upright doubler being fitted. Original cab had cracked on both sides of the doorway and had been patched in service resulting in smaller rear windows. With heavier angle iron and doublers installed this should not be a probl

Wes made great progress on the office container insulation.

Hanna fitting a new bowl liner to number 1 tender truck bolster.

Hanna and Leverett fitting a new bowl liner to number 1 tender truck bolster.

Roger needlescaling the air tank brackets.

Bob working on the cab.

Share

Newer Post10/23/2021 Work Session

Older Post10/2/2021 Work Session

New England Steam Corp.
a 501(c)(3) non-profit organization
P.O. Box 302
Winterport, ME 04496

Website by The Garbely Publishing Company

New England Steam Corp.
a 501(c)(3) non-profit organization
P.O. Box 302
Winterport, ME 04496

All content copyright ©2013-2025 New England Steam Corporation

Website by The Garbely Publishing Company